CALIBRATION & STARTER
USER MANUAL
GANNET 2+ / MAX +
5
4
No.
Allocation
1
2.4Gh Antenna
2
E FLight mode
3
Camera Gimbal
4
C
5
Joystick
6
5.5” Screen
7
MIC port
8
Return to launch
9
Power
10
Payload Release
11
Joystick 2
12
D
13
H
14
F
15
Speaker
16
Sim or Slot not activated
17
Charging Port
18
PPM Output
•
Unscrew the 2 screws on the battery door at the back of the Gannet
Drone
•
Insert Battery ( The main black and Red Power cables ) to the bottom of
the drone
•
Plug in the battery and screw the battery door shut ( making sure it is
sealed )
•
Insert the 3 landing gear ( 2 underneath the 2 rear motors and 1 posi-
tioned in front of the payload release)
•
Turn on the controller
•
Turn on the drone ( Light with flash a light green colour)
•
Open up Skydroid app on homescreen ( on the controller)
•
Push the connect button to connect controller to drone
•
Compass Calibrate drone.
•
Restart the drone after calibration
•
Connect propellers
•
Wait for indicator light on drone to turn a darker green
•
Time to start flying
Summary of Contents for GANNET 2+
Page 1: ......
