www.droneskyhook.com
Page
12
of
12
Operation
Drone-Sky-Hook Release & Drop Device (PLUS models only) – Control Modes of the
AUX Channel to Turn the SearchLight On or Off
DSH Models:
Single Release & Drop PLUS / Dual Release & Drop PLUS
Operation Mode 1 – Drone Rotation
Remote Controller (Mode 2)
LEFT STICK
Operation
Quickly Rotate (YAW) the drone two complete turns clockwise to command the AUX Channel to turn ON.
Quickly Rotate (YAW) the drone again two complete turns clockwise to command the AUX Channel to
turn OFF.
Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App
Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs
Remote Controller
C1 / C2 Button
Operation
Press C1 or C2 three times in quick succession (while maintaining about 0.5-1 second
between each press) to command the AUX Channel to turn ON.
Press C1 or C2 three times again in quick (while maintaining about 0.5-1 second between
each press) to command the AUX Channel to turn OFF.
DJI App
Operation
Settings – Main Controller Settings – Advanced
Settings
In the App menu switch the drone’s front LEDs ON, then OFF and then back ON or OFF, then
ON and then OFF.
(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to simulate the operation of the C1 or C2
buttons on the drone’s remote controller (see above).
Maintain about 0.5-1 second idle duration between each switch operation.
Operation Mode 3 – Manual – FUNC button on DSH unit
DSH Release & Drop unit
Operation
Press three times the device’s FUNC button to simulate the operation of the C1 or C2 buttons
on the drone’s remote controller (see above).
Maintain about 0.5-1 second idle duration between each operation of the FUNC button.
IMPORTANT NOTE
: At the end of each operation wait 3 seconds for the execution your command and before the initiation of the next command (False
Command Avoidance Algorithm (FCAA)).
