Drone-Clone Xperts QuadAir EXTREME, Instruction Manual, Page: 4 / 13

4
Calibrating the
QuadAir EXTREME
by remote
control
•
Step 1 : Turn on the remote controller;
•
Step
2 : Turn on your Drone by holding the power
button located on the top side of the drone.
•
Step 3 : Place the drone on a horizontal
surface.
•
Step 4 : Bind the transmitter with the drone
by pushing the throttle (left joystick) up to
the highest position, and then pulling it
straight down to lowest position . Solid
light will indicate successful bind.
•
Final Step : Move both sticks to lowest right
corner (like in the image above). LED lights
will start to flash rapidly. Wait a few seconds
till the lights are solid again and you are
done.