Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
9 Installation on DJI Matrice 600
Installing Ignis on a DJI Matrice 600 requires:
•
Installing the external trigger on the DJI controller (Figure 34).
•
Installing control cables to interface with the DJI system with Ignis.
•
Configuring the DJI software to properly interface with Ignis.
Questions on the procedure or for guidance during the installation, please contact the Drone
Amplified team.
9.1 DJI Channel Expansion Kit Installation
Ignis is controlled through a DJI Channel Expansion Kit, which is provided with the Ignis
System. There are a variety of tutorials on how to install these onto the DJI controller. One
such video can be found at
9.2 Interface Cables
Figure 121: Interface cables for DJI.
Figure 121 shows the interface cables provided in the kit.
Last Updated March 12, 2020
Page 132
