Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
Figure 101: You can change the orientation and spacing of the transect lines even after
generating waypoints.
Figure 102: Newly generated waypoints will replace the part of your waypoint mission that
passes through the transect region.
If you’ve generated some waypoints, but now you want to change the spacing or angle
of the transects without hitting undo a whole bunch of times, that’s not a problem. Simply
change the angle and spacing of the transects to what you want and generate the waypoints
again. For example, in Figure 101, I’ve added some waypoints that will take the drone
back home after the transect mission, but now I want to change the angle and spacing of
the transects. The waypoints that are in the transect region will be replaced with the new
Last Updated March 12, 2020
Page 117
