4
consequential or incidental damages so the above exclusion
may not apply to you. This warranty gives you specifi c legal
rights and you may also have other rights which vary from
state to state.
FCC REQUIREMENT
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment must be installed and operated in accordance
with provided instructions and the antenna(s) used for this
controller must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna
or controller. End-users and installers must be provided with
antenna installation instructions and controller operating
conditions for satisfying RF exposure compliance.
CE COMPLIANCE INFORMATION
FOR THE EUROPEAN UNION
INSTRUCTIONS FOR DISPOSAL OF WASTE EQUIPMENT BY PRIVATE
USERS IN THE EUROPEAN UNION:
This symbol on the product or its packaging
indicates this product must not be disposed
of with other household waste. Instead, it is
the user’s responsibility to dispose of their waste equipment
by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that protects human
health and the environment. For more information about
where you can drop off your waste equipment for recycling,
please contact your local city offi ce, your household waste
disposal service or location where you purchased the product.
DECLARATION OF CONFORMITY
Product:
Dromida 2.4GHz 4-Channel Tx Rx
FCC
ID:
IYFQ205
Item
number:
DIDJ1102
Equipment class:
1
Q205 transmitter:
The objects of the declaration described
here are in conformity with the requirements of the
specifi cations listed below, following the provisions of the
European 2006/95/EC Low Voltage Directive:
EN 60950-1:2006 Safety
The objects of the declaration described here are in conformity
with the requirements of the specifi cations listed below,
following the provisions of the European R&TTE directive
1995/5/EC:
EN300 328 V1.8.1.
Technical requirements for radio equipment
ETSI EN 301 489-1 V1.8.1, 301 489-17 V1.3.2
General EMC requirements for radio equipment
Hobbico, Inc.
2904 Research Road
Champaign, IL USA 61826
Revell Germany
Distributed in Europe by Revell GmbH
D-32257 Bünde Germany
DIDE1520 Canopy
Green
DIDE1521 Canopy
Red
DIDE1522 Canopy
Blue
DIDE1523 Canopy
Yellow
DIDE1530 Prop Set Green
DIDE1531 Prop Set Red
DIDE1532 Prop Set Blue
DIDE1533 Prop Set Yellow
DIDE1534 Belly Pan Green
DIDE1535 Belly Pan Red
DIDE1536 Belly Pan Blue
DIDE1537 Belly Pan Yellow
DIDE1540 Main
Frame
DIDE1541 Motor CW L/F R/R
DIDE1542 Motor CCW R/F L/R
DIDE1543 E-Board
DIDE1544 USB 1S LiPo Charger
DIDE1545 Prop Removal Tool
DIDE1546 LiPo 1S 3.7V 350mAh Batt
dromida.com
© 2015 Dromida, a Hobbico
®
company
DIDE10xx
TO PREVENT MOTOR
DAMAGE ALWAYS BE
SURE THE THROTTLE
IS OFF WHEN THE BLADES ARE
OBSTRUCTED OR CONTROL
IS LOST.
