background image

7

ALSO AVAILABLE

Instant FPV.

Vusion 250 Extreme FPV Race Pack

The revolutionary Vusion 250 Extreme FPV Race Pack blends innovation and convenience with the ultimate First Person View 
racing drone. It’s the first – and only – injection-molded RTF 250-size racing drone to come with all essential FPV equipment 
installed. Everything’s designed to work seamlessly together, for the ultimate flying experience!

  100% complete and Ready-to-Fly FPV Race Pack – no 

soldering, assembly or kit-bashing required.

  The first – and only – injection-molded racing drone 

designed with FPV in mind.

  A quality LCD monitor and FPV goggles provide pilots 

with an immersive First Person View flying experience.

  200mW video transmitter* uses 5.8GHz technology so 

pilots can watch flights in real time, without latency. 
The video transmitter features eight Raceband 
channels reserved for pro FPV racing.

  Modular, injection-molded construction adds impact 

resistance. Pieces insert and bolt on so pilots can be 
up and running in no time.

  A micro memory card slot makes it possible to transfer 

flying footage from the on-board 600TVL FPV camera 
without sacrificing video quality. Compatible with 
cards up to 32GB capacity.

  A 3S LiPo battery, AC charger and “AA” batteries 

round out the RTF package.

RISE0200

Turn your house upside down!

RISE Vusion House Racer 125 FPV

Get “up close and personal” with everything from the change in your sofa to those cobwebs in your ceiling fan. Explore every 
nook and cranny of your kitchen. Turn pillows and towels into an instant obstacle course. Zip and flip through every corner of 
every room. With the Vusion House Racer, there are no limits.

  100% Ready-to-Fly Vusion House Racer Indoor FPV 

Drone.

  600TVL FPV video camera.

  25mW VTX 40-channel, 5-band.

  Tactic FPV-RM2 40-channel 5.8GHz FPV monitor with 

4.3’ LCD and external antenna (LXGHAM).

  Tactic FPV-G1 goggles (LXGHAR).

  RISE J2000 2.4GHz 6-channel radio system with Auto-

Flip button and monitor holder.

  USB charger.

  (3) Flight modes: two gyro-assisted Stability Modes 

for beginners and Rate Mode for more advanced 
maneuvers.

  1S 3.7V 650mAh LiPo battery delivers 6-8 minutes of 

flight time.

  (4) “AA” alkaline batteries.

  Extra blades.

  Screwdriver.

  Instruction manual.

RISE0207

Summary of Contents for KODO FPV









Reviews: