The Molecular Disruptor is a DSP based multi-effect pedal that can be
loaded with 16 effects of your choice from the molecular patches list,
which is regularly being updated with new patches. These patches are
loaded on swappable “Molecular Modules”:
Essentially, this “à la carte” system allows you to have a pedal that has up
to 16 effects tailored to your needs and you can always order a new
module if you would like to have different effects.
Power Supply:
The power supply needs to be 9V/100mA center negative like the
common BOSS power supplies:
Make sure the polarity of your power supply is correct or it will damage
the pedal. Do NOT run at higher voltages.
As the pedal uses a digital processor operating at high frequencies, you
may hear some high pitched noise if you use it together on the same
power supply with other pedals (daisy chained) even when it is bypassed.
The noise can bleed through the power supply into the other pedal’s
signal. This is normal for such devices. It might not be the case in your
particular setup but if you notice that, I would suggest using an isolated
power supply.
