Page 39
Installation and Operation Manual - Cape Town 1800
ENGLISH
9.2.2 Masonry
Chimneys
The stove may also be connected to a masonry
chimney, provided the chimney complies with the
construction rules found in the building code enforced
locally. The chimney must have either a clay liner or
a suitably listed stainless steel liner. If the masonry
chimney has a square or rectangular liner that is
larger in cross-sectional area than a round 6" flue,
it should be relined with a suitably listed 6" stainless
steel liner. Do not downsize the flue to less than 6"
unless the venting system is straight and exceeds 25
feet in height. When passing through a combustible
wall, the use of an insulated listed thimble is required.
9.2.3
Rear vent installation
From the factory the stove is prepared for top mounting
of the flue collar, but this stoves have an optional rear
flue outlet, therefore the flue collar can be fitted either on
the top or at the rear as required.
Rear venting into a masonry or steel chimney through a
thimble vent configuration or other than described here
must follow local codes or NFPA 211 or CAN/CSA_B365
guidelines and methods.
Required installation components:
• Chimney
cap
• Insulated
chimney
• Tee
section
• Tee support bracket
• Chimney connector pipe
• Wall pass-thru thimble
• Wall
support
Multi-purpose
cap
Storm collar
Flashing
Support bracket
assembly
Chimney section
Pipe end plate
T & branch extension
Wall support
Wall face
plate
Wall
thimble
Connector
pipe
Summary of Contents for CAPE TOWN 1800
Page 2: ......
