DriveNTalk bhf 2000 User Manual Download Page 4

7

6

1.2 MFB operation

When gesture sensing mode

As it’s shown in below image, place 
your hand close to the gesture 
sensing area before operating the 
buttons. For accurate operation, 
face your hand right front of the 
product while keeping 3 cm 
distances from your product.

When touch mode

Place user’s finger on the touch area 
to activate the buttons. 
For accurate operation, touch the 
center of touch mode area.

1.3 Volume control 

Gesture sensing mode

Move your hand to right to increase volume and to left to decrease it. 
For accurate operation, keep 3 cm distances from the sensor.

Volume up                                               Volume down

Touch mode

Slide your finger to right to increase volume and to left to decrease it. 
For accurate operation, make sure to slide your finger all the way 
in the touch mode area.

Volume up                                               Volume down

!NOTE

  

Volume control is only available during call or streaming audio. This device has a 
built-in direction sensor for increased volume when turned to the right and lowered 
volume when turned to the left regardless of placement.

1

1

2

2

!NOTE 

This device has a built-in direction sensor for increased volume when turned to 
the right and lowered volume when turned to the left regardless of placement.

Summary of Contents for bhf 2000













Reviews: