Enigma Lightweight Aluminium Wheelchair (LAWC_IFU 12/14)
Page 8 of 12
using the wheelchair as a seat in a motor vehicle
This Enigma wheelchair has been tested to Wheelchair Crash Test standard
ISO 7176/19 using restraints from Q-Straint. Wherever possible the
wheelchair user should use the vehicle’s fitted seats and the wheelchair
should be folded away and placed safely in the luggage compartment of the
vehicle or restrained.
If it is not feasible to transfer to the vehicle’s seat then the Enigma
wheelchair may be used as a chair whilst the vehicle is moving with the
necessary restraints and with the wheelchair facing the front of the vehicle.
Drive Medical recommends that the following types of restraints be used:
a)
Buckle and tongue or standard hook restraints for the front of the
wheelchair,
b)
‘J’ restraints for the rear of the wheelchair,
c)
3-point harness for the user restraint.
The lap belt should be worn across the front of the pelvis, with the
webbing fed between the back posts and armrest.
The upper torso belt should be worn over the shoulder. The belt should be
worn as firm as possible without being uncomfortable. Ensure the webbing is
not twisted. For more information on restraints please contact Drive Medical.
Below is a diagram illustrating the recommended positions for the restraints.
The securement points for the restraints are marked on the wheelchair using
the symbol (below right).
Wheelchair Restraints
Occupant Restraints
LEGEND
45
