6
Assembly Instructions Cont.
6. Connect the 9V battery (sold separately) to the
battery clip on the motor. It is stored in the recess
under the motor cover. With this battery installed,
the motor can be operated to return the sleep
surface to the horizontal position in the event of a
power failure.
7. To install motor, remove locking caps on top of
the motor.
HAND CONTROL
The
Delta
bed comes with a hand control that will
illuminate when the bed is plugged into a grounded or
polarized wall outlet, or with 9V battery (sold separately)
installed in the hand control. The hand control will
illuminate as long as the wall or battery has power. With
this battery installed, the motor can be operated to return
the sleep surface to the horizontal position in the event
of a power failure.
NOTE: Before installing motor, plug hand
pendant cable into motor as shown
