assembly instructions
Do not attempt to adjust or operate
walker without carefully reading all
instructions in this manual.
1. Remove all contents from carton.
2. Open walker and drop seat to down position.
Always engage and disengage wheel locks on both
sides simultaneously.
1. To Slow Down or Come to a Temporary Stop
— Pull up slowly on the loop locks with four
fingers until unit slows down or comes to a
temporary stop.
2. To Temporarily Lock Wheels in Position
— Press down on both loop locks with palms
until you hear a “click” that will tell you wheels
are locked.
3. To Release Wheel Locks
— Push up on both loop locks with palms of hand
to original position.
loop lock operation
safety precautions
1. Please make sure the walker is fully opened,
seat is down and secured in the down position.
2. Test walker for stability before applying full
weight to hand grips.
3. Test the loop locks before operating the walker.
When wheels are locked, (see illustrations for
locking and releasing locks), lock bar on rear
wheels should prevent wheels from turning. If
the wheels turn while brakes are locked, please
take unit back to dealer for adjustment. When
locks are released, the wheels should turn freely.
4. Always lock loop locks before sitting and do
not use seat when unit is on an incline or
uneven ground.
5. Replace tires when significantly worn
or damaged.
6. Do not have anyone push you while you are
seated on the walker.
7. To fold walker, lift seat to upright position.
Deploy one trigger release and swing brace to
closed position. Repeat on the other side.
NOTE:
This is a walking aid only. It is not to be
used as a transportation device.
WEIGHT CAPACITY: 300 LBS.
Wide
Comfortable
Seat
Trigger Release
Allows For Easy
Folding
Swivel Wheel
Bearing For
Smooth Operation
Backrest
Orthodic
Hand Grip
