Cirrus Powerchair Owners Handbook
Page 17 of 24
Doc Code: PCC_IFU (02/15)
DISASSEMBLY:
The disassembly procedure is the assembly procedure in reverse. Please study the
assembly procedure before attempting this procedure. To disassemble:
1.
If installed, remove the calf strap. Then press the button on the side of the
leg rest to swing away. Once swung away, the leg rests can be lifted up to
remove.
2.
Disconnect the RED and BLACK connectors on the battery boxes. Lift up
the battery boxes to remove.
3.
Remove the seat cushion and back cushion.
4.
Lift up the centre of the battery box and then the centre of the seat sling to
fold up the frame.
5.
If required, remove the back posts and anti-tip wheels.
TRANSPORTATION:
If required, fold up and disassemble the powerchair for transportation. The
powerchair should always be securely restrained during transportation, and
preferably folded and in a car boot or luggage section. The powerchair is not
suitable for use as a seat in a motor vehicle, so the wheelchair occupant should
always exit the chair and transfer the vehicle’s seat before travelling.
