background image

17

An electric wheelchair needs some basic attention to ensure it provides reliable service.
We recommend that the user ensure that the power wheelchair is checked regularly for
maintenance requirements and receives a thorough annual maintenance check up.

We recommend that the chair have at least one full service from an authorized dealer
when needed. If you notice an irregular aspect of your chair, phone your nearest
authorized dealer for assistance. They will advise if the chair should be returned for
repairs. If the chair is to be returned, they will advise on the availability of replacement
units, and the required method of packing and shipping.

ANNUAL MAINTENANCE 

We recommend that the chair have at least one full service per year from an authorized
Dealer. This helps ensure your power chair is functioning properly and helps prevent
future complications. This should include:

1. Checking the tires.
2. Checking the batteries and terminals.
3. Checking the controller programming for the user's needs.
4. Checking the wheelchair frame.
5. Checking the upholstery condition.

REGULAR MAINTENANCE AND CLEANING

1. Avoid knocking or bumping the controller, and the joystick.
2. Avoid prolonged exposure of your power chair to extreme conditions, such as heat,
cold, or moisture.
3. Keep the controller and joystick clean.
4. Check all controller connectors are tight and secured properly.
5. Never hose off your power chair or place it in direct contact with water.
6. Keep the upholstery and frame clean by wiping with a soft cloth, particularly after
driving through wet, sandy or muddy conditions. Do not use harsh abrasive materials
when cleaning. Do not apply liquid cleaners or solvents directly to the controller, battery
charger or any electrical connections. 

MAINTENANCE, CLEANING & FAULT FINDING

Summary of Contents for Cirrus Plus EC Power


























Reviews: