16
18
15
17
Unit Operation
Unit Operation
Unit Operation
Unit Operation
2. Pressurization
Initial pressure is first pumped to 190mmHg. If the current user’s systolic blood pressure
is over 190mmHg, the unit will automatically re-inflate to the proper shelf.
Note: Pressurization will gradually subside and ultimately stop when cuff is not properly
applied to the arm. If this occurs, press “ START/STOP ” button to turn the unit off.
Irregular Heartbeat Indicator
If the monitor detects an irregular heart rhythm two or more times during the measuring
process, the Irregular Heartbeat Symbol "
" appears on screen along with
measurement results. Irregular heartbeat rhythm is defined as rhythm that is either
25% slower or faster than the average rhythm detected while measuring systolic blood
pressure and diastolic blood pressure. Consult your physician if the Irregular Heartbeat
Symbol "
" frequently appears with your test results.
5. Deleting/Storing Test Results
User may delete their current test result due to unfavorable testing conditions or for
any other reason. To delete the last test result, press the "SET" button after result is
displayed. If result is not deleted, it will automatically store by date within the previously
configured Memory Group.
Note: Be sure the appropriate Memory Group selection is made prior to testing.
If the number of tests surpasses the allotted 60 memories per group, the most recent
tests will appear first, thus eliminating the oldest readings.
Power Off
The “ START/STOP “ button can be pressed to turn off the unit in any mode. The unit can
turn off the power itself about 3 minutes if there is no operation in any mode.
Safety Precaution: If pressure in arm cuff becomes too extreme while testing,
press the “ START/STOP ” button to turn power off. The cuff pressure will rapidly
dissipate once the unit is off.
Memory Check
With power off, you may check past test results by using the “ M ” button. The most
recent test result and oldest test result in memory can be viewed by pressing and holding
the “ M “ button upon activating test results you can press the “ M ” button to scroll
through all test results stored in memory.
Note: Previous test results will only be displayed from the most recently used memory
group. To check previous test results in other memory groups, you must first select
the desired group and then turn monitor off.
(See “Select Memory Group” on Page 10.)
3. Testing
After cuff inflation, air will slowly subside as indicated by the corresponding cuff
pressure value. A flashing " " will appear simultaneously on screen signaling heart
beat detection.
Note: Keep relaxed during testing. Avoid speaking or moving body parts.
4. Result Display
Three short beeps sound when testing is complete. The screen will display
measurements for systolic and diastolic blood pressure. An indicator representing the
current measurement will appear next to the corresponding WHO Classification.
Indicator
Note: Refer to Page 23~24 for detail WHO Blood Pressure Classification Information.
1
1
1
1
1