- For minor adjustment the brake adjuster (B) located on
the handbrake can be turned out from the hand
brake counterclockwise to tighten the brake, or
clockwise to loosen the brake. Keep the cable adjuster
nut (C) against the hand brake.
- If further adjustment is required, apply the same
method of adjustment at the lower cable adjuster.
- As you adjust the cable adjuster and the adjuster nut
away from each other the brakes will tighten, and as
you adjust them closer the brakes will loosen.
- If further adjustment is required, use the Allen key
(included) to adjust double-way regulator, shifting
pads to proper position.
To adjust the seat height, open clamp located under the
seat. Set seat to desired height and close clamp.
To fold the tiller down, pull the bottom lock lever away
from the knee walker until the lock is disengaged. While
holding the lock lever in the down position, fold the tiller
down until it rests on the knee pad.
adjusting the hand brake
adjusting handle height
adjusting seat height
to fold tiller
To adjust the handle height, release the lock tab on the
collar and adjust the handle to the desired height. Push
the lock tab back to tighten.
figure 5
figure 6
C
B
A
figure 7
