Drive Proof DP-210WH, Instruction Manual

Page: 10 / 24

10
Power ON/OFF
This product has no power on/off button. To power on, start the engine while the power cable has been
connected to the vehicle.
After powering on, the POWER / IN CAM / AUDIO LEDs will come on, and the
camera will make a beeping sound. Recording will start in approximately 10 - 15 seconds with beep
sound.
* If all 3 LED are blinking quickly with continuous beeping sound, the recording is not working. Please
check SD card or camera connection.
Once the engine is stopped, the power maintains for 3 ~ 5 seconds by internal super capacitor and after
audible tone, the last file saves with beep sound.
• GPS RECEPTION : Power LED is slowly blinking green.
• NO GPS RECEPTION : Power LED is slowly blinking red.
• Event : Power LED is quickly blinking green.
Basic Operation
This product is a model integrated with GPS antenna. If powered on, GPS
signals will be first detected with signal sounds. Then, GPS functions will be
enabled to capture the user’s driving route, speed, duration and distance.
- Do not operate while driving.
- Recording is possible only when the SD card is inserted.
- If the SD Card is removed while in operation, some or all of the data may be lost.
Before operating this product, please note the following.