11
Pumping Instructions
1. Control Panel Description
1. Place the breast shield over your breast so that your nipple is
properly centered in the tunnel.
2. Take care not to kink the Tubing while pumping.
3. While the pump unit is connected to power source, press the
On/Off Button to switch on the device.
4. The effective single breast pump operates in two modes:
Stimulation and Expression. Once the device is turned on, the
timer will start and the pump will begin. Simultaneously, the
30 minute timer will start and the pump will begin with the
Stimulation Phase Level 1 vacuum for 2 minutes before entering
into the Expression Phase at level 3 vacuum (factory default).
5. If your milk starts to flow earlier, press the Phase Button to
toggle between stimulation and expression. Make sure the milk
is flowing into the bottle properly. If you do not press the Phase
Button the pump will automatically switch to Expression Phase
after 2 minutes.
