Drive Medical GentleFeed+ MQ9130, Instructions & Assembly

Page: 8 / 14

Cleaning Breast Pump Parts
• All breast pump parts that come in contact with your body and milk, such as
bottles, valves, and breast shields, should be cleaned after each use.
• Wash the pieces thoroughly to remove germs and bacteria with liquid soap
and warm water.
• It is not necessary to clean the breast pump tubing unless breast milk gets
into it.
• If you must wash the tubing, ensure the tubing is hung up to air dry before
attaching it to the pump. If any moisture/condensation appears in the tubing
after pumping, turn the pump on until the tubing is dry.
Cleaning the Electrical Unit:
• Electrical units, which house the motor and batteries, should be wiped with a
clean paper towel or soft cloth after each use.
• The electrical unit should never be put into water or other liquids for cleaning.
It should also never be sterilized in a microwave sterilizer.
Assembling the Expression Collection Kit
Gentlefeed + comes pre-assembled, however you must reas-
semble the device after each cleaning. All parts of the device
and accessories that come in contact with the breast milk,
including the bottle, breast shield, membrane, and valve,
should be cleaned and sterilized after each use.
Be sure to wash hands before touching the breast pump
and accessories, and avoid touching the inside of containers
or lids.
1. Press the Membrane (3) into the
holes of the Valve (2). The membrane
should be pressed flat and tight.
2. Mount the assembled valve with
membrane connected to the Breast
Shield (1).