Page 6
Titan LTE Owners Handbook (Issued 07/17)
INITIAL ASSEMBLY (this is also applicable after disassembly for transport)
1. Loosen and remove the two knobs on the
shroud. Lift up the front shroud to remove. Lift
up the front shroud to remove.
2. Connect the battery pack.
3. Insert the seat in to the seat post. Lift up the
swivel lever and rotate the seat until it locks in
position.
4. Insert the arms in to the seat.
5. Set the arms to the required width then secure
by turning the armrest knobs clockwise.
6. Plug the cable from the joystick remote in to
the port at the back of the powerchair base.
Assembly
