Drive DeVilbiss Healthcare Sidhil CHE03 Instructions For Use Manual Download Page 23

Page: 23 / 28

9.2 Electrical Data

Voltage in:

230V±10%, ~50/60Hz.

Current

in:

1,25A

Mains

cable

fuse: 3-5A

*Duty

cycle

10%

2 mins

of continuous use followed by

18 mins

ot in use.

Electrical safety standards

BS EN 60601-1: 2006

EMC

60601-1-2:2007

The Treatment Chair range are compliant to the requirements of 60601-

1-2: 2007, the RF emissions are very low and are not likely to cause any

interference to nearby electronic equipment, however interference to sensitive

equipment

possible.

Electrical

shock

prevention:

Liquid ingress protection

IPX4

The electrical system is only suitable for use when:
Ambient temperature

+5° to +40°C

Humidity

20% - 90% at 30°C

Qualified users of the Treatment Chair can help prevent electromagnetic

interference by maintaining a minimum distance between portable and mobile

RF communications equipment (transmitters). If the Treatment Chair or any

alternative equipment is found to be operating abnormally mitigation measures

are to be taken, such as the separation distances being increased and/or the

products being re-orientated.

*Electrically operated chairs are intended to be operated intermittently rather than continuously. If the chair is

operated continuously for up to 2 minutes it must then be left for at least 18 minutes before re-use to allow the

electrical system to cool sufficiently.

If the chair is continuously used for an extended period of time and it

exceeds the duty cycle the control box may become temporarily disabled or irreparably damage.

Summary of Contents for Sidhil CHE03





























Search results

Summary of Contents for Sidhil CHE03

Reviews:

Brands by name

Popular brands

Drive DeVilbiss Healthcare Sidhil CHE03, Instructions For Use Manual

Search results

Summary of Contents for Sidhil CHE03

Reviews:

Brands by name

Popular brands