12
Instructions for use TRS 130
Drive Medical GmbH & Co. KG | Last updated: 31.03.2020 | Errors and alterations excepted
EN
Double-function parking brake
To apply the brake, press the lever downwards (
photo 5
).
At the same time, the directional position of the wheel is
blocked.
To release the brake, press the head of the lever down-
wards (
photo 6
).
5
6
Mounting the footrests
Hang the provided footrests with the two holes on the
respective retaining pins as shown (photo 7+8)
.
Locking and unlocking the footrests
To lock the footrests, swiv-
el them to the center un-
til they audibly click into
place. To unlock them,
press the lever inwards as
shown and move the foot-
rests to the side (
photo 9
).
Toilet bucket
Always insert and remo-
ve the toilet bucket from
the rear (also with the co-
ver on). The toilet bucket
snaps into place and the
toilet seat can be easi-
ly lifted off for cleaning
(
photo 10
)
.
Height adjustment of the footrests
To adjust the height of the footrests, first loosen the
clamping screw (
photo 11
) with the wrench provided.
After shifting, the footrests can be adjusted (
photo 12
)
for lower leg lengths of 420 – 500 mm.
Tighten the clamping
screw. The heel strap can
optionally be attached
using the Velcro fastener
(
photo 13
).
IMPORTANT:
Never use footrests to
assist with standing up!
