984P Plastic Snap Pliers – Round, Star and Heart Instructions
(cont.)
Instructions for Applying Flower Snaps
984P Plastic Snap Pliers – Flower Instructions
Pliers Tools:
Snap Parts:
Removing Tools:
Slip hook of gray tool remover
inside ledge of pliers and press
down to release tool.
Repeat for opposite side.
Fabric Preparation for
Flower Plastic Snaps
Instructions for Making Holes in Fabric
Use two layers of light to medium-weight fabric, reinforced with interfacing.
Mark position of snaps on topside and underside of garment.
Test a snap on swatch of fabric.
Awl:
Protective Cover:
Remove protective cover from point of awl. Replace for storage.
Making Holes:
1. Center point of awl over mark.
2. Push awl through fabric to make a small hole.
Inserting Tools:
Insert small side of metal die base
into the pressing head. Insert metal
die base in one side of pliers and
coral cap holder in other side.
Applying Round Cap & Socket
(Underside of garment)
:
1. Insert prong of round cap into
hole.
2. Place socket over prong.
3. Position round cap in coral cap
holder.
4. Squeeze pliers firmly to apply snap. Check
for tightness; squeeze again, if necessary.
Right side of fabric
2.
Right side
of fabric
Wrong side
of fabric
1.
Right side of fabric
3.
Right side
of fabric
Wrong side
of fabric
Brown Cap
Holder
Pressing
Head
Metal
Die Base
Cap
Socket
Round
Cap
Stud
4.