Drinkwell FCB-REKA, Operating Manual

Page: 9 / 28

www.petsafe.net 9
KO
EN
10. If you have trouble reaching certain spots or hard-to-reach corners, try using
a cotton swab or purchase the Drinkwell
*
Cleaning Kit, a 3-Piece Brush kit. To
purchase a Cleaning Kit, visit our website at www.petsafe.net to locate a retailer
near you or contacting the Customer Care Centre at asiacc@petsafe.net.
Pump Maintenance
Important:
Cleaning the Pump is essential to the longevity of the Pet Fountain, as
well as the cleanliness of the water. Clean the Pump every two weeks. Warranty may
be voided if the Pump’s motor is not cleaned regularly.
1. Remove Pump from the Pet Fountain as explained in the “Pet Fountain Disassembly
and Cleaning” section.
2. Once the pump is out of the Pet Fountain,
with your thumb and forefinger, gently
squeeze on either side of the Faceplate,
and pull it off. It may be necessary to
insert a fingernail into the seam of the
Faceplate to pry it off (
Fig. 7 & 8
).
3. Next, you will want to remove the Intake
Plate by placing your fingernail underneath
the small lip located on the narrow side of
the tear drop shaped Intake Plate Pull-Tab
and pull it out (
Fig. 9
).
4. Once the Intake Plate is removed, you can
also remove the Impeller (white, 3-bladed
propeller) which is held in place magnetically. To remove
the Impeller, use a fingernail to get underneath a blade
and lift out (
Fig. 10
).
Pump Impeller Intake Plate
Faceplate
with Flow
Control Knob
Fig. 7
Fig. 8
Fig. 9
Intake Plate
Pull-Tab
Fig. 10