www.petfountain.com · www.petsafe.net
www.petfountain.com · www.petsafe.net
14
15
Do not attempt repairs on the motor yourself. Return it under the cover of the
warranty.
If the plug of this device gets wet, turn off the electricity to that outlet. Do not
attempt to unplug.
To avoid the possibility of the plug or outlet getting wet, the outlet should always
be above the level of the fountain.
Examine this appliance after installation. It should not be plugged in if there is
water on the cord or plug.
Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning or has been damaged.
If an extension cord is necessary, a cord with a proper rating should be used.
The electrical use of this appliance is 7.7 watts.
Close supervision is necessary when any appliance is used by or near children.
Always unplug any appliance when not in use, before putting on or taking off
parts, and before cleaning. Never pull on an electrical cord to remove from
the outlet.
Do not use appliance for anything other than its intended use. The use of
attachments not recommended or sold by the manufacturer may cause an
unsafe condition. Do not modify the unit.
Do not install or store appliance where it will be exposed to weather or
temperatures below 40° F / 4.4° C.
Read and observe all important notices on the appliance and in the packaging.
Some animals have been known to be sensitive to plastic food and water
containers. If your animal shows signs of an allergic reaction to the plastic, please
discontinue use until you have consulted with your veterinarian.
TIPS ON USE
When being introduced to the Drinkwell
®
Pet Fountain, your pet may be cautious
of this new and unusual object. After beginning operation of your fountain, simply
allow your pet to adjust at his or her own pace. Some pets may take several days
or longer to begin use, while others will start right away.
Your pet may prefer that the fountain be placed away from their normal feeding
area. Try placing it in another location, such as a different area of the kitchen or in a
bathroom or utility room.
Add ice cubes to the bowl or reservoirs for refreshing, ice-cold running water!
THE FOUNTAIN & YOUR ENVIRONMENT
If you live in a humid environment and have problems with mold or algae, soak all
the parts in a diluted bleach solution for about 10 minutes after regular cleaning.
Use a 10% bleach and 90% water solution. Pour some of the solution down into
the pump’s cavity too. This is a great way to disinfect the fountain. However, you
must be sure to rinse all the parts thoroughly in fresh water to remove all
the chlorine.
If you have hard water, you may start to see white mineral deposits on or inside
the pump. This can eventually prevent the impeller from turning properly. To avoid
having to replace the pump, please take the following steps:
1) Clean the pump more frequently than you have in the past; or
2) Clean the motor with a vinegar solution (20% White Vinegar and 80%
Water) and let the solution soak inside the pump’s cavity for several minutes; or
3) Use bottled water instead of faucet water.
1)
2)
3)
MANUFACTURER’S SAFETY INSTRUCTIONS
It is not recommended that any appliance be left running unattended for a
prolonged period of time as the water may get consumed or evaporate and
cause the motor to run dry.
Do not allow pets or children to chew on or swallow any parts. If you are
concerned about the power cord, purchase a cord conduit (a hard plastic
protector) at any local hardware store.
Standard Safety Precautions
1)
2)
3)
4)
The Everflow Fountain is intended for
year-round indoor household use or seasonal outdoor
use. Do not operate the fountain in temperatures
below 40° F/4.4° C.
192 oz
(1.5 gal)
