www.petfountain.com
www.petfountain.com
1) Stainless Steel Bowl
: The Stainless Steel Bowl is the foundation of
the fountain. The circular bowl piece can be carried by simply gripping
underneath the sidewalls of the bowl.
2) Stainless Steel Cone
: The Stainless Steel Cone serves as the housing
for the fountain components and encloses the pump from curious pets.
The Cone acts to reduce the splash and sound of the falling water.
3) Filter Housing
: The Filter Housing slides into the opening at the top of
the cone and its main purpose is to hold the filter in place.
4) Filter
: The cylindrical filter features a pull-tab at the top and should
be placed in the Filter Housing with the tab facing upwards for easy
placement and removal.
5) Filter Housing Lid
: The Filter Housing Lid is a screw on lid that
attaches to the Filter Housing to keep the filter in place. It serves as the
base piece to attach the interchangeable spout rings & Flow Control
Cap.
6) Interchangeable Spout Rings
: The five interchangeable spout rings
can be easily changed based upon your pet’s preference and can
provide up to 5 streams of water for multiple pet households.
7) Flow Control Cap
: The Flow Control Cap is attached to the top of the
fountain and easily adjusts the flow of water by turning the cap to the
left or right. Turn to the right, to increase the flow of water. Turn to the
left to decrease flow.
8) Pump
: A small low-voltage submersible pump that can be
disassembled for cleaning.
THE PUMP IS NOT DISHWASHER SAFE!
Remove the pump from the fountain prior to cleaning. The pump’s
electrical cord features a detachable inline plug for easy removal.
9) Cord Clips:
The three plastic cord clips serve to cover the electrical
cord as it feeds over the rim of the bowl and these clips are required to
hold the cone piece in place.
There are several parts to the Stainless Steel Drinkwell
®
360™
that will be described here in detail.
UNDERSTANDING THE DRINKWELL
®
PARTS
The electrical use of this appliance
is 2 watts.
Close supervision is necessary when
any appliance is used by or near
children.
Always unplug any appliance when
not in use, before putting on or taking
off parts, and before cleaning. Never
yank a cord to remove from the
electrical outlet.
Do not use appliance for anything
other than intended use. The use of
attachments not recommended or
sold by the manufacturer may cause
an unsafe condition. Do not modify
the unit.
Do not install or store appliance
where it will be exposed to weather
or temperatures below freezing.
Read and observe all important
notices on the appliance.
Do not attempt repairs on the motor
yourself. Return it under the cover of
the warranty.
If the plug of this device gets wet, turn
off the electricity to that outlet. Do not
attempt to unplug.
To avoid the possibility of the plug or
outlet getting wet, the outlet should
always be above the level of the
fountain.
Examine this appliance after
installation. It should not be plugged in
if there is water on the cord or plug.
Do not operate any appliance if it
has a damaged cord or plug, or
if it is malfunctioning or has been
damaged.
If an extension cord is necessary, a
cord with a proper rating should be
used.
1) While the capacity of the Stainless Steel Drinkwell
®
360™ Fountain has
been increased, it is not recommended that any appliance be left running
unattended for a prolonged period of time as the water may get consumed
or evaporate and cause the pump to run dry.
2) Do not allow pets or children to chew on or swallow any parts. If you are
concerned about the power cord, purchase a cord conduit (a hard plastic
protector) available at any hardware store.
MANUFACTURER’S SAFETY INSTRUCTIONS
FOR INDOOR USE ONLY
Standard Safety Precautions
pg. 9
pg. 10