Drinkpod DP1000, Owner'S Manual

Page: 10 / 15

Step 22
To Remove:
1. Pull back filter pod.
2. Twist counter clockwise.
3. Gently pull filter out/down.
Step 23
To Replace:
1. Gently insert filter upwards.
2. Twist clockwise.
3. Gently push filter back in/up.
Step 24
Open
C
1/4” Shutoff
Valve by twisting
clockwise.
18 17
Step 21
Open
Y
Drinkpod Cabinet Door
to ensure Filters
N
,
o
,
P
, and
Q
are properly mounted. Step 19
Firmly push the open end of new
short tubing into
M
Cold Water
Inlet, on the back of your Drinkpod
until you cannot push it any further.
Step 20
Firmly pull
outward on new short
tubing section to engage
quick-gripping seals.
Removing & Replacing Filters
STOP!!!
Before proceeding,
immediately check
for any leaks at the
adapter site, pvc
shutoff, water inlet,
4 individual filters,
and hot drain cap
for leaks.