background image

Page 5

For technical questions, please call 1-800-444-3353.

SKU 68287

4.  Use tools with the lowest vibration 

when there is a choice.

5.  Include vibration-free periods each day of work.

6.  Grip tool as lightly as possible (while still keeping 

safe control of it).  Let the tool do the work.

7.  To reduce vibration, maintain the tool as 

explained in this manual.  If any abnormal 

vibration occurs, stop use immediately.

  SAVE THESE 

INSTRUCTIONS.

Grounding

TO PREVENT ELECTRIC SHOCK AND 

DEATH FROM INCORRECT GROUNDING 

WIRE CONNECTION: Check with a qualified 

electrician if you are in doubt as to whether 

the outlet is properly grounded.  Do not modify the 

power cord plug provided with the tool.  Never remove 

the grounding prong from the plug.  Do not use the tool 

if the power cord or plug is damaged.  If damaged, 

have it repaired by a service facility before use.  If the 

plug will not fit the outlet, have a proper outlet installed 

by a qualified electrician.

Double Insulated Tools:  

Tools with Two Prong Plugs

Outlets for 2-Prong Plug

1.  Tools marked “Double Insulated” do not require 

grounding.  They have a special double insulation 

system which satisfies OSHA requirements and 

complies with the applicable standards of Underwriters 

Laboratories, Inc., the Canadian Standard 

Association, and the National Electrical Code.

2.  Double insulated tools may be used in either of the 120 

volt outlets shown in the preceding illustration.

   

(See Outlets for 2-Prong Plug.)

Extension Cords 

Note:  Extension cords must not be used with this  

item’s charger.

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V~

Volts Alternating Current

A

Amperes

n0 xxxx/min.

No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk 

of Eye Injury.  Wear ANSI-approved 

safety goggles with side shields.

Read the manual before 

set-up and/or use.
WARNING marking concerning Risk 

of Fire.   

Do not cover ventilation ducts. 

Keep flammable objects away.

WARNING marking concerning Risk of 

Electric Shock.   

Properly connect power cord 

to appropriate outlet.

Summary of Contents for DrillMaster 68287















Reviews: