manualshive.com logo in svg

Drill Master 95578, Set Up And Operating Instructions Manual, Page: 12 / 20

Share
Download
Drill Master 95578 Set Up And Operating Instructions Manual Download Page 12

SKU 95578 

For technical questions, please call 1-800-444-3353. 

Page 12

SPECIFICATIONS

Electrical Input

120 V~ / 60 Hz / 4.3 A

Motor No Load Speed

11,000 RPM

Max. Accessory 

Diameter

4-1/2” (114 mm)

Arbor Hole Diameter

7/8”

Spindle Thread

5/8” x 11 TPI

 

UNPACKING

When unpacking, make sure that the 

item is intact and undamaged.  If any parts 

are missing or broken, please call Harbor 

Freight Tools at 1-800-444-3353 as soon 

as possible.

INSTRUCTIONS FOR 

PUTTING INTO USE

  Read the ENTIRE IMPORTANT 

SAFETY INFORMATION 

section at the beginning of this 

manual including all text under 

subheadings therein before set 

up or use of this product.

 

TO PREVENT 

SERIOUS INJURY 

FROM ACCIDENTAL 

OPERATION: 

Turn the Power Switch of the 

tool off and unplug the tool 

from its electrical outlet 

before assembling or making 

any adjustments to the tool.

Note:

  For additional information regarding 

the parts listed in the following pages, 

refer to the Assembly Diagram near 

the end of this manual.

Assembly

Adjusting the Wheel Guard

 

TO PREVENT 

SERIOUS INJURY: 

Do not operate this tool 

without the Wheel Guard 

properly installed.

1.  Loosen the Wheel Guard Bolt.
2.  Rotate the Wheel Guard as needed 

to shield you during the planned 

work.

3.  Tighten the Wheel Guard Bolt 

securely.

4.  Check the Wheel Guard to ensure it 

is firmly in place. Adjust if necessary 

before proceeding.

Installing the Side Handle

 

TO PREVENT 

SERIOUS INJURY: 

Do not operate this tool with 

one hand only or without the 

Side Handle properly 

installed.

5.  The Side Handle may be installed on 

either side of the Gear Housing. 

6.  Screw the threaded end of the Side 

Handle into the selected position. 

Tighten securely before beginning 

work.

REV 10d

Summary of Contents for 95578





















Reviews:

No comments