Page 4
For technical questions, please call 1-800-444-3353.
SKU 68986
power tool use and care
1.
Do not force the power tool.
use the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
2.
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
3.
Disconnect the plug from the
power source before making any
adjustments, changing accessories, or
storing power tools.
Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
4.
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
5.
maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. if damaged,
have the power tool repaired before
use. Many accidents are caused
by poorly maintained power tools.
6.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely
to bind and are easier to control.
7.
use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Service
have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Rotary tool Safety Warnings
1. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
2. Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
3. Do not lay the tool down until it
has come to a complete stop.
Moving parts can grab the surface
and pull the tool out of your control.
4. When using a handheld power tool,
maintain a firm grip on the tool with
both hands to resist starting torque.
5. Do not depress the spindle lock
when starting or during operation.
6. Do not leave the tool unattended when
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from
its electrical outlet before leaving.
7. This product is not a toy.
Keep it out of reach of children.
Sa
FE
tY
Op
ER
ati
O
n
m
aint
Enan
CE
SE
tup
Summary of Contents for 68986
Page 1: ......
