SKU 67046
For technical questions, please call 1-800-444-3353.
Page 10
troubleshooting
problem
possible causes
likely solutions
Tool will not start.
Discharged Battery.
1.
Internal damage or wear.
2.
Charge the Battery.
1.
Have technician service tool.
2.
Sander does not
remove residue from
the workpiece, even
after repeated brief
attempts.
Sand paper too fine.
1.
Using wrong tool for the job at
2.
hand.
Use a more coarse sand paper.
1.
Do not continue sanding to avoid
2.
damaging workpiece surface. Use
another method to remove residue.
Excessive noise or
rattling.
Internal damage or wear. (Carbon
brushes or bearings, for example.)
Have technician service tool.
Overheating
Forcing tool to work too hard.
Allow tool to work at its own rate.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
