SKU 67025
For technical questions, please call 1-800-444-3353.
Page 7
FunCtIOnaL DESCRIptIOn
Specifications
Battery Type
NiCd / 18V / SKU 67029
Charger
SKU 67031
Chuck Capacity/
Type
3/8” / Keyless
Speeds
0-450 RPM / 0-1300 RPM
Torque Settings
24 (Forward and Reverse)
*
Please Note: When in Hammer Mode, Torque
setting is not adjustable.
InItIaL tOOL SEt up
Read EntIRE ImpORtant
SaFEtY InFORmatIOn
section at beginning of manual
including all text under
subheadings therein before set
up or use of this product.
note:
For additional information regarding
parts listed in following pages, see
Assembly Diagram at end of manual.
unpaCkIng
Make sure item is intact and undam-
aged. If parts are missing or broken, call
Harbor Freight at 1-800-444-3353.
InStRuCtIOnS FOR
puttIng IntO uSE
Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tO pREVEnt
SERIOuS InjuRY
FROm aCCIDEntaL
OpERatIOn: turn tool off
and remove Battery pack
before assembling or making
any adjustments to the tool.
note:
For additional information regarding
parts listed in following pages, see
Assembly Diagram at end of manual.
Functions
OpERatIng InStRuCtIOnS
Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Inspect tool before use, looking
for damaged, loose, and
missing parts. If any problems
are found, do not use until
repaired.
Chuck
Drill Bits
Trigger
Speed Control Lever
Torque Selector
Chuck Adjusting
Knob
