User Manual
RANGE HOOD |
PRISMA 76
Professionale
8
5. TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
the machine and the light do
not work after you’ve pressed
the function key
1 not plugged in properly
2 The lamps are damaged
3 The wire and/or the cable
disconnected
4 The transformer for the lights is
damaged
1 Check the plug and insert
completely
2 Change the lamps
3 Contact the distributor and/or
service office
4 Contact the distributor and/or
service office
Lights work and the motor
don’t work
1 The impeller is stopped
2 The capacitor is disconnected
and/or damaged
3 The motor is damaged.
1 Check and remove the blockage
2 Contact the distributor and/or
service office
3 Contact the distributor and/or
service office
Shaking
1 The item was not correctly hung
2 The motor is too loose
3 A damaged impeller causes
imbalance
1 Hang the item stably
2 Fasten the motor
3 Contact the distributor and/or
service office
Only one of two keys for the
motor work
1 The switch is broken
2 Bad connection with the control
board
1 Contact the distributor and/or
service office
2 Contact the distributor and/or
service office
Insufficient suction
1 The vents on the outlet cover
not open completely
2 There is too much airflow
around the machine
3 The oil filter is too dirty
4 The wire and/or cable damaged
1 Lower the machine, check the
vents and loosen them.
2 Close any open windows
3 Clean it
4 Have a mechanic fix it
