Version 1.0.0.1
Date: 2022-01-22
3.
Installing the Image Transmission Module
1. Remove the original battery module from your Ghost 4K+ camera.
2. Place the Image Transmission Module on the camera body, ensuring that the module’s 30pin
connector is above the camera’s female connector, press down on both ends simultaneously till
the module clicks into place.
3. Install the Antenna on the module, now your Ghost N2 is ready for use.
Reminder:
when using the Ghost N2, please supply power on the USB port through the Power/Audio
2-in-1 Cable, since the camera could consume 1.5A current in peak period, camera may not work
properly if the 2-in-1 cable (with external power) not applied.
