AImportant Safety Instructions: Always disconnect the
TurboDryer from its power source before performing
any maintenance or cleaning
To
CLEAN INTERIOR (As NEEDED):
To remove grill and blower wheel:
1. Use a Phillips #2 screwdriver to remove 2 screws.
2.
Remove inlet grill
3.
Loosen the blower wheel shaft nut (3/8" socket driver)
Note the backstop for ensuring alignment when replac-
ing wheel.
Pull the blower wheel out of the unit.
To remo
v
e
contro
l
panel
arid
motor
Rotate the unit onto its side so that the controls are facing up.
5.
Unscrew 2 screws securing cord guard (#2 Phillips
screwdriver).
6.
Remove cord guard.
7.
Remove 4 motor mount bolts with 3/8" nutdriver.
8.
Pull motor assembly out of the housing.
To reassemble unit:
Follow the steps above in reverse order (starting with #9).
Note:
Before tightening shaft nut on wheel, ensure that bolt is aligned with flat
spot on shaft (see photo A).
07-01537 Copyright 2006 Dri -Eaz Products, Inc.
3