07-00438C 2010-08
2
Dri-Eaz Products, Inc.
TROUBLESHOOTING
For any problems not listed below call the Dri-Eaz Service
Department at 800-932-3030.
Problem
Cause
Solution
Mats won’t seal
Gasket seal has
been damaged
Check gasket seal for any
damaged areas; repair
with gasket seal tape
included with system.
Floor is uneven or
severely “cupped”
or “crowned”
Seal Rescue Mat edges
to floor using removable
painter’s tape.
KIT SPECIFICATIONS
Kit no.
F286
F287
F450
Large mat
4
4
6
Small mat
2
2
Vacuum hoses
3
Connector sleeves
2
Hose cuffs
6
T-connectors
5
Spare gasket material
1 roll
Component Descriptions
Large mat: 46 × 30 in.
Small mat: 23 × 30 in.
Mat material: Clear PVC plastic. Mats are stackable
for storage
Gasket material: 117 ft. roll of .375 ×.125 in. closed
cell neoprene tape
Hose with cuffs: 7 ft. vacuum hose length with cuffs
attached
Hose cuffs can be threaded on to hose ends
Connector sleeves: connect two hose lengths
together at hose cuffs
T-connectors: Connects hoses in multiple
configurations.
Rescue Mat Related Products
DriForce Base Unit (F211-BU)
WARRANTY
Warranty information is available from your dealer or at
Warranty registration
Visit
warranty.Dri-Eaz.com
to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment, as well as to contact
you in case we have important safety information concerning
your Dri-Eaz product. If you determine service is required,
have your equipment model, serial number and original proof
of purchase available and call your distributor for assistance
with obtaining a return material authorization (RMA).
CONTACT
Dri-Eaz Products, Inc.
15180 Josh Wilson Road
Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950
Figure 2: Push-Pull Extraction System
Using AirWolf/Wolf Pack
Figure 1: Typical Rescue Mat Setup