Assembly
1
Preparing media shelf and partition panels assembly
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
This will make the assembly easier.
□
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted
floor or the empty carton to avoid any scratches.
□
Securely screw the cam bolts (DD) into the designated small holes on the media shelf (L) and partition panels (O and
P) using a Phillips screwdriver.
2
Gluing wood dowels
□
Glue the wood dowels (BB) into the designated holes on the panels (N, O, P and Q) as shown. It is very important
to use a small amount of glue on both ends of dowels and wipe away the excess glue immediately.
NOTE:
Refer to the dowel guide drawings in this step for further clarification on how to properly glue in the wooden dowels.
Apply this method whenever instructed to install wood dowels
.
GLU
E
X
X
FINAL
The dowel assembling guide
BB
BB
DD
P
O
L
BB
BB
O
P
N
Q
BB
BB
Summary of Contents for 320643193
Page 22: ......
