SAVE THESE INSTRUCTIONS- FOR HOUSEHOLD USE ONLY
8
Preparing Your Kettle Base
IMPORTANT:
Place your kettle base on a flat, stable level heat and water
resistant surface away from any hot surfaces or appliances. Never place any
items under the kettle base.
Ensure you have approximately 20 cm clear around the sides of you kettle.
Unwind the desired length of power
cord from the underside of the kettle
base.
Push the cable between the two cable
grips on the base after you have the
correct length of cable.
IMPORTANT:
Ensure the power cord is
slotted into the retaining clips on the
kettle base.
If the power cord is trapped under the
kettle base your kettle will not work.
The cup display will show error
message ‘
0
’. Unplug the kettle base
and reposition the power cord to
correct.
Redikettle Inst.indd 8
18/08/2020 13:43
