OPERATING INSTRUCTIONS
Empty the spray-gun of any residual paint into a separate spills-dish.
Open the main valve for compressed air (item 7 illustration 1).
Open the lid for the automatic washer (make sure it `clicks` into the full open position).
Place the spray-gun inside (see illustration 5).
Be sure to fit the trigger clip following illustration 6, and to push the spray-gun up against the nozzle for the paint-
channel (item 1 illustration 5) before you lock it into position with aid of the magnets of the trigger clip.
If you prior to cleaning prefer to remove the Air-cap and the needle of the spray-gun, then place those items as shown
by arrow 5 in illustration 5.
Close the lid, and start the automatic pre-wash cycle by pressing the foot pedal No.8A in illustration 1. The spray-gun
will now be automatically cleaned for approx. 1.5 minutes with circulating solvent.
When the automatic pre-wash cycle is completed, the spray-gun can be rinsed with clean solvent. The rinsing pump is
activated by pressing the foot pedal No. 9A in Picture 1, and continues to work for as long as the pedal is depressed.
The pump will feed approx. 75 cc of solvent per pump stroke. 4 pump strokes are generally sufficient for one rinse.
Less if the solvent has recently been changed.
When the cleaning procedure is completed, the lid can be opened and the spray-gun taken out. It can now be manually f
urther washed or rinsed if required.
By pressing foot pedal No.10A in Picture 1, recirculating solvent will be fed through the brush placed in the sink (item 1
illustration 7A).
By pressing foot pedal No.11 in Picture 1, clean solvent will be fed through the spray-nozzle placed in the sink (item 2
illustration 7A).
The brush and spray-nozzle in the sink can be used independently of the automatic washer at any time, provided that
the lid for the automatic washer is closed.
Connect the spray-gun to the air-line on the left side of the machine (item 4 illustration 1), and blow out the spray-gun
through the funnel in the sink (item 3 illustration 7A). By using this funnel, you prevent the fumes from spreading within
the premises.
Finally, the spray-gun can be blown dry by using the air-gun on the right side of the unit (item 12 illustration 1).
Close the lid after cleaning.
Summary of Contents for Boxer Triple C
Page 3: ......
