DRESSTA 32501, Operator'S Manual

Page: 161 / 177

SECTION 6
SPECIFICATIONS
Page 8
DRESSTA TD-15H
SPECIFICATIONS
6.3.8. OPERATION WEIGHTS (approximate)
A machine with mounted equipment (hydraulic tilt), operator, full fuel tank and standard
equipment:
TD-15H TD-15H-LT
Blade Semi-U Semi-U
R.O.P.S. 19850 [kg] 20150 [kg]
Cab with A/C and ROPS 20250 [kg] 20550 [kg]
6.3.9. ELECTRIC SYSTEM
System voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 [V], negative ground
Batteries (maintenance-free) . . . . . . . . . . . . . . . . . . . . . . . . . . . . two 12 [V]
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 [A]
6.3.10. FUEL CONSUMPTION
During intensive slot dozing tests in sandy soil (soil density app. 1.89 [t/m
3]
) the average fuel
consumption amounted to app. 37 [l/h].
Average operational fuel consumption.
The above specified fuel consumption value refers to a short period of intensive operation of the
machine only. However, taking into consideration actual longer periods of machine operation fuel
consumption value is considerably lower and can be estimated at the level of app. 28 [l/h].
6.4. SPECIAL TORQUES
No Description of tightening place
Size of
thread
Torque
[Nm]
No of
places
1 Main Harness to Pod at Rear of LH Console 4-40 0.7 4
2 Horn Switch Terminal (On RH Console) 8-32 1.8-3.4 2
3 Neutral Start & Engine Shutdown Switch Terminal 8-32 2 4
4 Back-up Alarm Terminal 8-32 2 2
5 Back-up Alarm Switch Terminal (In Console) 8-32 2 2
6 Cab Dome Light Mounting Screw 10-24 2 2
7 Transmission Filter Warning Light Switch 10-24 1.4-1.8 2
8 Hydraulic Filter Warning Light Switch 10-24 1.4-1.8 1
9 Cooling Temperature Sensor Terminal 10-32 2 1
10 Circuit Breaker Mounting Screw (On Hood Support) 10-32 2 2
11 Circuit Breaker Mounting Screw (On Instrument Panel) 10-32 2 10
https://www.truck-manuals.net/