Dressler 13150 400 V, User Manual

Page: 102 / 176

4-64 Communication Interfaces HPG 13150 400 V (A)
Dressler
®
HF-Technik GmbH
Prerelease version
193
report
pulsing
frequency
Reports the RF pulsing frequency.
The controller returns three data bytes,
least significant byte first, representing
the pulse frequency in Hertz.
Set with command 93 .
0 3
196
report
pulsing
duty cycle
Reports duty cycle in percent of on-time
per cycle.
The controller returns two data bytes,
least significant byte first, representing
the duty cycle in the percent of on-time
per cycle.
Set with command 96 .
0 2
198
report
software
revision
level
Reports the revision level of the software.
Used in conjunction with command 130
to obtain the version/revision of the
software (for example, 1.16).
4 data
bytes
4 ASCII
characters
205
report run
time
Reports the total time that the generator
was producing output power.
The controller returns four data bytes,
least significant byte first, representing
the amount of time in seconds that the
unit was producing output power.
0 4
Table 4-13. Host port commands (Continued)
Command
Description
Number of
Host Data
Bytes
Number of
Response
Data Bytes