dreo DR-HTF007, User Manual, Page: 6 / 11

3
4
Dreo Tower
Fan
Dreo Tower
Fan
ASSEMBLING
YOUR TOWER FAN
2
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
1
2
4 5
6
3
Keep two base halves in a
crossed position, then insert
pegs on one half onto the
slots on the other half.
Press down on edges to click two
base halves together.
Fit the base onto the bottom of
the fan by aligning the arrows
on the underside.
Rotate the base clockwise to
lock in place.
Thread the cord through the REAR cord
keepers before putting the fan upright.
Run the cord through the center
hole.
Up
Down
Slots
Pegs
CAUTION
- Do not operate the tower fan if the base has not been installed.
- Make sure to thread the cord through all rear cord keepers.