8
9
Control Panel
Remote Control
Note:
All the functions can be achieved through the
buttons on the remote control.
Power ON/OFF
Power Indicator
Temp
Temperature-
Mute / Unmute
Mode / Heat level
Timer
Oscillation
Operations and Functions
Place the heater on a firm, level surface free from obstructions,
and at least 3ft. (0.9m) away from any wall or combustible
material. Plug into an appropriate voltage AC 120V outlet, The
unit will enter standby mode with a beep and power indicator
on red. Your heater is ready for use now.
Press on the heater / remote control once to turn
the heater on with default settings: Power indicator on
red, default temperature “
95°F
” & high heat level “
HI
”
on LED display.
The RED indicator ( ) lights up when the heater is
switched on.
When the unit is on, repeatedly press on the heater
/ remote control to cycle through High (HI) ->Low (LO) ->
ECO -> High (HI) modes.
Hold on the heater for 3 seconds, OR press the
button on the remote control to turn the buzzer on or
off. The “
HI
”,“
LO
” and “
ECO
” will flash once along with a
beep sound if Mute/Unmute is enabled.
Press once again to turn the heater off. If the heater
is operating, it will take 15 seconds for the heater to shut
off, with the countdown time shown on the display.
When ECO mode is turned on, the heater will adjust the
working mode (High or Low) automatically based on the
ambient temperature.
When the set temperature is reached, the heater will
stop working.
You can also adjust the set temperature by pressing
or .
"ECO"
will light up on the display when ECO Mode is
selected.
Power ON/OFF
Mode / Heat Level Settings
Mute / Unmute
ECO Mode
