housing. With extended use, the posi-
tive detent indicator associated with
the depth control knob will begin to
wear down and be less noticeable. This
is to be expected and does not indicate
malfunction of the engraver.
5. The engraver point furnished with
your engraver is carbide steel. Under
most conditions it will perform very
satisfactorily on glass, steel, ceramics
and other hard-materials. However, for
industrial and commercial work where
continuous operation is required, a
diamond point is recommended.
Do not engrave on
electronic media
such as CDs, DVDs, etc. Engraving on
these materials may damage the
media.
DREMEL LIMITED WARRANTY
™
Your Dremel product is warranted
against defective material or work-
manship for a period of two years
from date of purchase. In the event of
a failure of a product to conform to
this written warranty, please take the
following action:
1. DO NOT return your product to
the place of purchase.
2. Carefully package the product by
itself, with no other items, and
return it, freight prepaid, along
with:
A. A copy of your dated proof of
purchase (please keep a copy
for yourself).
B. A written statement about the
nature of the problem.
C. Your name, address and
phone number to:
-6-
!
WARNING
DM 2610951642 05-07 5/7/07 12:00 PM Page 6
