Servomotor Type SQN 7...
dreizler A 3001 E - 18.12.2015 | A 2025 - 2.14 | EN - 11.11.2014
54
Note the values for the starting torque of 4 Nm +-0,1 Nm.
See Fig. 16-3 "Potentiometer ASZ 12..."
pos. 2 and Fig. 16-5 "Layout for refitting with potentiometer ASZ...on SQN 7..." pos.1.
Fix the potentiometer to the servomotor housing with a slotted screw (9.5mm length).
Set the new control panel and then the switching roller to 90°. Attach the scale dial in such a way that
the value 90° is set opposite to the marking arrow on the servomotor housing.
The display dial will then be visible through the slot when replacing and fixing the new, higher cover.
Set the potentiometer in the following position:
Position
0°
of servomotor =
0
; position
90°
of servomotor =
1000
Fig. 16-4 Potentiometer schematics
1
Potentiometer
CAUTION!
Comply with max. current capacity 100
.
Fig. 16-5 Layout for refitting with potentiometer ASZ...on SQN 7...
