DREES Lichttechnik GmbH
http://www.drees-lichttechnik.eu
f
Seite 2 von 2
DLM
O
2
0
1
3
3
0
0
1
Assembly instruction and manual
In-ground luminaire with RGB-Power-LED
574-730-98, 574-731-98, 574-732-98, 574-733-98
In-ground luminaire with RGB-Multicolour-Power-LED
557-731-98, 557-733-98
In-ground luminaire with Power-LED
576-740-40/50/70, 576-741-40/50/70, 576-742-40/50/70, 576-743-40/50/70
Safety instructions for assembling and operating of luminaires
The electrical connection must be arranged by an electrician.
Local instructions have to be observed during installation.
The lightings are ready for connection: VDE 0711.
Improper use releases us from liability claim.
All information at the luminaire has to be noted.
Do not look into the LED beam and do not glare other persons with it.
During operation the luminaire gets warm; do not cover and protect it against external
heating.
When wires at the luminaire are damaged they have to be disconnected from supply
immediately.
Damaged wires have to be replaced by original wires from the manufacturer directly.
Minimum distance to the illuminated area 0.20m.
Immediately switch off when the light is flickering, the luminous color differs
immensely or there is a black out.
Luminaires with damaged or broken protective glass have to be put out of action
immediately. The LED has to be protected against dirt and touch.
Execute maintenance and cleaning service only when the luminaire is switched off.
The luminaire - but not the LED - can be cleaned with a soft wet cloth.
Do not use any cleaning supplies or abrasives.
Changes or modifications to the luminaire will expire the warranty.
Assembly instructions for in-ground luminaires
Please note that external influences are of central importance for installation of in-
ground luminaires. A long and trouble free operation of in-ground luminaires depends
on a careful installation and regular maintenance. Please always read the detailed
installation manual of each in-ground luminaire.
The provided mounting hole has to be designed so that on one hand a mixture of
sand and gravel or pebbles guarantee an optimal drainage and on the other hand the
wall (concrete or suitable cement pipe or PVC pipe) is so concreted that the luminaire
can be installed stably and that no drainage water could ingress into the steel case.
The drainage below the luminaire must be water permeable (sand / gravel or pebbles,
not compressed) and at least 20cm deep so that no stagnant water can reach the
mounting hole or the steel case.
The in-ground luminaire must not be mounted in a sink in which water and dirt could
collect.
