© NEUREITER | Original-Manual Version 2.0
8
EMERGENCY STOP/OFF and ON Function
The lathe is equipped with a red combination switch (0) with which it
can be
EMERGENCY STOPPED
as well as stopped in the conventio-
nal way (Fig. 2). By pressing the
red button (0)
, all machine functions
are deactivated.
To restart, press the green
ON button (I)
.
The toggle switch is used to shift the rotational direction of the spindle
from “forward” to “reverse” and vice versa. Be sure, that faceplates or
chucks are secured with a lowering guard to the spindle. The potenti-
ometer regulates the rotational speed.
Danger!
The wood turning lathe must always be used with functioning safety devices. Turn off the lathe immediately on
noticing that a safety device is faulty or has been removed! All accessories added by the user must be equipped
with the specified safety devices.
Overview of other safety devices
The wood turning lathe is equipped with various safety devices:
1.
Electrical grounding conductor which is connected to the local mains supply via the safety plug.
2.
Cover with interrupter switch over the pulley drive.
3.
Electric motor cover.
4.
Emergency stop via the movable control unit.
5.
Stop rods on both lathe ends.
5. Safety functions
The safety devices are for the protection of people and material assets. Without intact safety devices, severe injuries can be the
consequence.
Warning signs on the wood turning lathe
The warning signs on the wood turning lathe are for your
safety. Always keep them legible and observe their meaning
Wear safety goggles (see Fig. 3).
Fig. 2
Fig. 3
