(b) TP NIT: Scan the transponders in one certain network.
SAT SCAN: Scan all the transponders in one satellite (these
transponders have been set in advance).
(c)
(d.) Blind 8MHz: Blind scan the frequency from 950-2150 by step
8MHz; see<Figure2-6>.
<Figure2-6>
(e.) Blind 12MHz: Blind scan the frequency from 950-2150 by step 12 MHz.
In the course of signal searching, you can get to know the status by
bar meter of the
LEVEL and QUALITY as well as the numerical of S/N, FEC,
BER. DiSEqC indicates which port is connected to the DiSEqC1.0 switch.
Adjust the dish slightly until you get the maximum of level and best quality.
Once the signal is got,
the LOCK light come
s
on
immediately. Now,
if press F1 to enter Outdoor / ZOOM mode, you can find acontinue
beeping sound
working as indicator that may change its tone frequency
according to the signal strength.
2.MODE CHANGE: Press F1 to shift the display mode between Normal
/Zoom/Outdoor Zoom mode:
<Figure2-7>
10
