Page 5 of 7
E
x 8
Nuts (M8)
x 8
Bolts (M8x45)
E
x 16
Flat Washers (M8x20)
J
H
Lift up the slat frame by one person with two hands.
Another one assemble the gas lift with nuts.
Don't over tighten, a small gap is left so stem can
move freely.
Put the slat frame on the lift mechanism, use three sets of bolts (E), flat washers (J) and nuts (H) to loosely fit the
slat frame to the first four holes on each side of the lift nearest to the headboard, finger tight.
Lift up the slat frame, use the locking nut (G) to fit the pistons to the lift mechanism.
Note: A small gap is left so stem can move freely. This is normal, See the sketch.
SMALL GAP
x 4
Nuts (M8)
G
Bed Frame Assembly
6
5
J
J
H
M
G
G
07
When
fully a
ssem
bled a
nd th
e
mattre
ss is in
positi
on,
pleas
e rais
e & lo
wer th
e
ottom
an 4-5
time
s
To en
sure t
he ga
s pisti
ons a
re
fully lu
brica
ted
Do not fully tighten all the bolts before
confirming the metal frame is in correct
position. Frame must be in the center
of bed in length & width.
x 1
Spanner (M8)
M
